MACHINE SELECTION / PRACTICAL GUIDE

How to choose an excavator size for your site

Work backwards from access, digging reach and material handling to choose an excavator class that can do the job.

Start with the limiting dimension

Measure the narrowest point along the complete route, including gates, corners and the unloading area. Compare those measurements with the proposed machine in its travel configuration. An excavator that fits through a gate may still lack space to turn or work. Ask for the actual model dimensions rather than relying on the weight class as a proxy for width.

Separate digging depth from productive reach

Record trench depth, distance from the safe operating position and where spoil will be placed. Maximum brochure reach does not describe a complete working cycle. Explain whether the machine must load a truck, reach over an obstacle or reposition regularly. Give the supplier a sketch showing the excavation and spoil location so the proposed class can be assessed against the same layout.

Match attachments to the material

A general bucket, narrow trenching bucket, auger and breaker create different requirements. Send material information and attachment dimensions with the enquiry. Ask the supplier to confirm hydraulic compatibility and any operating restrictions for the exact combination. Do not assume that an attachment available at the depot is suitable for every excavator in the same weight range.

Compare complete working arrangements

A larger machine may finish sooner but need a more expensive delivery and a larger working area. A smaller machine may take longer or require extra material handling. Compare transport, operator, attachment charges and estimated duration together. Keep supplier productivity estimates clearly identified as assumptions until ground and access conditions have been assessed.

  1. Road approach
  2. Unload safely
  3. Reach workface
Three separate access checks: the transport route, unloading area and machine’s path to the work. Original hire-desk planning diagram.
ILLUSTRATIVE SCENARIO · NOT A CUSTOMER CASE STUDY

Put the decision into practice

A landscaping team needs to excavate behind an occupied house. The front gate is wide enough for its first-choice machine, but a right-angle turn beside the house is tighter. The team draws the whole route, marks the turn and sends photographs with measurements. It requests two proposals: a smaller machine that can reach the work directly, and a larger machine with a separate material-handling arrangement. The comparison includes extra hire days, spoil movement and delivery. The useful outcome is a documented trade-off between access and production, rather than a decision based only on daily rate. No size is selected until the supplier confirms the actual transport configuration and the site team confirms working space and ground suitability.

What to compare for this task
SituationCheck thisAvoid relying on
Restricted routeActual travel width, height and turnWeight class alone
Deep or offset digWorking reach and spoil positionMaximum depth alone
Breaker or augerCompatible attachment and hydraulicsMatching coupler appearance

A mistake to avoid

Requesting a machine by tonnage without describing the task leaves the supplier guessing. Two machines in a similar class can have different tail swing, travel dimensions and attachment limits. Send the constraints first and ask the supplier to explain its proposed configuration.

Example enquiry wording

Please propose an excavator for [task/material]. The route is [width/height] with a turn shown on the attached sketch. Required dig depth is [value]; spoil will go to [position]. Quote [attachments], delivery, collection and the expected hire period separately. Please identify the model and any access assumptions.
Build and download your enquiry →

Include these in your enquiry

  • Narrowest access width and height
  • Digging depth and spoil position
  • Material and attachment requirements
  • Delivery vehicle and unloading space

Use these prompts to prepare a discussion. Confirm the actual equipment, site requirements and commercial terms with your supplier and the people responsible for the work.

Practical answers before you hire

Is the smallest excavator always cheaper?

No. Compare the total hire duration, transport and any extra handling. A low daily rate can be outweighed by a slower working cycle or unsuitable attachments.

Can a retractable undercarriage solve every tight-access problem?

No. It may help at a narrow section, but turning space, overhead clearance, working configuration and stability still need assessment for the actual model.

Should I include spoil removal in the machine quote?

Describe where spoil will go even if another contractor removes it. Loading height, truck access and double handling can change the proposed equipment.

What if the supplier offers another model?

Request its dimensions, reach and attachment compatibility before accepting. A substitute in the same weight class is not automatically equivalent.

Sources and editorial method

How AI assistance, sources and editorial examples are used · Report a correction

Prepared by Machinery Hire Directory. Source checked 24 September 2026. Scenarios, comparison prompts and enquiry examples are original editorial illustrations; they are not reports of completed projects or supplier quotations.

Safe Work Australia — plant and machinery ↗

The linked source provides background. Supplier terms apply to that supplier, and model guidance does not replace the applicable local requirements or equipment documentation. No independent technical reviewer is claimed.

Equipment related to this guide