SITE LOGISTICS / PRACTICAL GUIDE

Plan a machinery delivery through tight access

Check the delivery vehicle, unloading area and final machine route as three separate access problems.

Start at the approach road

The machine's width is only one part of the delivery. Ask what vehicle will arrive and provide information about the approach, turns, overhead obstructions and site entrance. Identify any public-road or site access matters that need assessment by the transport provider and relevant authority. Do not assume a route is suitable simply because a smaller truck used it previously.

Reserve an unloading area

Nominate where the delivery will stop and where unloading can occur. Keep the area clear in the project programme, not just on a drawing. Agree who manages pedestrians, vehicles and communication with the driver. Send photographs and dimensions ahead of time so the supplier can raise concerns before a loaded vehicle reaches the gate.

Walk the final machine route

Follow the path from unloading to the workface and record corners, gradients, soft areas and overhead clearance. Discuss surface and ground suitability with the responsible site team. Temporary storage or a new excavation can invalidate yesterday's route. Assign someone to reconfirm access on the delivery day and notify the supplier if the arrangement has changed.

Issue a concise arrival brief

Include the correct entrance, site contact, booking reference, arrival window and fallback holding arrangement. Explain how the driver should make contact without relying on a map pin alone. Confirm waiting-time treatment if access is delayed. Retain the final brief with the order so site staff and the supplier are working from the same version.

  1. Road approach
  2. Unload safely
  3. Reach workface
Three separate access checks: the transport route, unloading area and machine’s path to the work. Original hire-desk planning diagram.
ILLUSTRATIVE SCENARIO · NOT A CUSTOMER CASE STUDY

Put the decision into practice

A machine will fit through a site's entrance, but the transport vehicle cannot turn in the street. The team sends the supplier a route sketch showing the road approach, standing area, unloading point and machine travel path. It asks the transporter to confirm the delivery configuration and what must be clear when the vehicle arrives. A neighbouring driveway is marked as unavailable rather than quietly assumed to be usable. The resulting plan assigns a site contact and a delivery window. This prevents a common gap: confirming the machine dimensions while leaving the much larger delivery operation unresolved.

What to compare for this task
SituationCheck thisAvoid relying on
Narrow entranceMachine travel configurationNominal machine width
Restricted streetTransporter turning and standingCar-route navigation
Shared accessWindow, contact and separationArriving without coordination

A mistake to avoid

A photograph without dimensions rarely proves clearance. Measure the controlling points and label the drawing. If measurements or ground information are uncertain, state that uncertainty so the transporter can request a site assessment.

Example enquiry wording

Attached are the approach, unloading and machine-route sketches with dimensions. Delivery must occur in [window]. Please confirm vehicle configuration, standing space and any unresolved access requirements. Site contact is [name/number]; no neighbouring land is available unless separately agreed.
Build and download your enquiry →

Include these in your enquiry

  • Delivery vehicle and approach
  • Unloading zone
  • Machine route to workface
  • Named arrival contact

Use these prompts to prepare a discussion. Confirm the actual equipment, site requirements and commercial terms with your supplier and the people responsible for the work.

Practical answers before you hire

Can the supplier assess access from photographs?

Photographs help, but measured dimensions and route information are also needed. Ask whether a site visit or further assessment is necessary.

Should I measure the gate or the whole route?

Measure the controlling points along the entire route, including turns, overhead restrictions and the unloading area.

Can a delivery driver arrange road access on arrival?

Do not rely on that. Agree responsibilities and any required approvals before dispatch.

What if the route changes after booking?

Send the revised plan immediately and reconfirm access before the vehicle leaves the depot.

Sources and editorial method

How AI assistance, sources and editorial examples are used · Report a correction

Prepared by Machinery Hire Directory. Source checked 24 September 2026. Scenarios, comparison prompts and enquiry examples are original editorial illustrations; they are not reports of completed projects or supplier quotations.

NHVR — route planning ↗

The linked source provides background. Supplier terms apply to that supplier, and model guidance does not replace the applicable local requirements or equipment documentation. No independent technical reviewer is claimed.

Equipment related to this guide